T.I.P. Inc. Equipment

• Over 1200 replaceable stainless steel spikes, places 75-80 holes per square foot.
• Different length spikes available.
• Rear Brush Attachment also available.
• Percolates and loosens soil which promotes healthier turf.
• Releives surface compaction for a more efficient gas exchange.
• Provides more efficient water usage.
• Improves drainage; solves dry spots.
• Percolates and loosens soil which promotes healthier turf.
• Improves seed to soil contact.
• Higher germination rates.
• Reduces seed and chemical costs.
• Less disruptive to putting surfaces.
• Great for greens, fairways, and athletic fields.

The Sweep-N-Clean is the ideal pick-up sweeper for a wide variety of applications. Whether cleaning areation cores or excess topdressing from golf course greens, or picking up litter from a park or playground, the Sweep-N-Clean will work for you.

Two brush types are available: a softer black brush for golf courses and other natural surfaces, and a stiff white brush for heavier pick-up applications.

• Powerful and Reliable 5.5 hp. Honda engine.
• Remote operated electric clutch on brush drive.
• Remote operated electric actuated clamshell hopper.
• Manual brush height adjustment.
• Quick-Set Transport mode to raise brush off of the ground.
• Walking beam front axle to follow uneven terrain.

The Sweep-N-Clean's extra large 25 cubic foot capacty holds more material, so you can cover more area before emptying.

The Brush-It incorporates a remote controlled electric clutch and electrically actuated height adjustment, allowing the operator to start and stop, raise and lower the brush without leaving the tow vehicle.

After core aerification of the greens, the Brush-It can be used to windrow the cores for easy pick-up. The Brush-It can be angled to the left or to the right as well as perpendicular to the direction of travel.

Once the cores have been picked up, the Brush-It can be used to sweep topdressing into the core holes. With a Honda 5.5 hp engine, the Brush-It has plenty of power to move most any type of heavy topdressing.

The Brush-It also helps to save on sand usage by efficiently filling the holes and moving the excess material into windrows that can be easily removed.

Heavier tines allow for a more aggressive raking action as well as a longer life span. The addition of a height-adjustable finishing brush helps to redistribute in-fill material that may be left on the surface after the Scratch-It passes over, and also smooths out any remaining rake marks in the turf.

The Scratch-It is available with either 78 or 120 six inch tines, depending on your spacing requirements. The tines can be tilted to increase or decrease aggressiveness. The the whole rake assembly is height adjustable to control aggressiveness as well.

The Groom It is also effective for:

• Breaking up aerification cores
• Removing dew from fairways and greens
• Eliminating runners and grain from greens
• Improving ball roll
• Filling aerification holes

...and much more.

The extra 6 feet of width doesn't mean you'll have more difficulty maneuvering your Groom-It around. The Groom-It Plus wings fold to an upright position, maintaining the Groom-It's original 6 food width for transportation. You can also use the Groom-It with the Groom-It Plus wings in the upright position if you need to brush a narrower area.

Once installed on the Groom-It, the Groom-It Plus wings can be dismounted and mounted again in a matter of minutes, using no tools. So, if you have an application that requires the full 12 feet of width, and then have others that require only 6, both situations can be accommodated easily.

Like our original Sweep-N-Clean, the SW48-M incorporates a remote-controlled electric clutch and an electric actuated hopper, so the operator doesn't need to leave the two vehicle nearly as often. The hopper holds about 16 cubic feet of material, and empties out cleanly.

Both our original Sweep-N-Clean and the new SW48-M Mars Type sweeper have outstanding pick up abilities, and can be used in a variety of locations.